Filter By:
Accessories/Parts
$10.99
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty
$11.99
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
$13.99
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
$18.99
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
$19.99
End caps for 86" Cross Bars. Includes four end caps
Please note these end caps are specific to the 86" cross bar.
$20.99
Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp.
- Includes 2 FatStraps to carry one fat bike
- Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"
$25.00
Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.
$26.99
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
$28.99
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- Weight: 0.44 lbs.
- Dimensions: L 15.50 in x W 1.00 in x H 18 in
$29.99
Body for HitchLock. Requires SKS lock core. (Sold Separately)
- Weight: 1.00 lb
$38.99
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Product Specs:
- Weight: 0.20 lbs.
- Dimensions: L 4.00 in x W 3.25 in x H 1.00 in
- Limited Lifetime Warranty
$39.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.
$39.00
Hitch Lock V4
- Includes hitch pin, lock, and 2 keys
- For locking hitch rack to car
$39.95
The Thule Xadapt 7 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
$39.95
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).
$42.99
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements
Product Details:
- Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately).
- Structural steel brackets with powder-coat finish for durability and resistance to the elements.
- The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed).
- Only compatible with Yakima SkyLine and TimberLine towers.
- Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle.
Product Specs:
- Weight: 0.50 lbs
- Some assembly required, 60 minute install
$43.99
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market.
- Includes T-slot hardware, covers, and install tool.
- Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts.
- Compatible with Yakima JetStream bars and most other T-slot style crossbars.
Product Specs:
- Weight: 0.25 lbs.
- Dimensions: L 2.75 in x W 1.50 in x H 0.50 in
- Limited Lifetime Warranty
$44.99
The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered.
Product Details:
- Hanging storage hooks for the SkyRise tent keep your camping gear organized
- Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities
- Yakima carbine attachment hook is secure, strong, and easy to use
- Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear
- Sold as a pack of four
Product Specs:
- Weight: 0.48 lbs
- Dimensions: L 6.00" x W 1.60" x H 0.50"
$44.99
Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2.
- Includes 2 FatStraps to carry two fat bikes?
- Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"
$49.99
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
$49.99
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad.
PRODUCT DETAILS
- Foam padding protects boats and other cargo from damage
- Durable, ballistic nylon construction
- Look and loop closures and 28” length perfectly fit around the LongArm crossbar
- Center cutout allows side or centered placement on crossbar
- Sold as a single pad
TECHNICAL SPECS
- Weight: 0.50 lbs
- Dimensions: L 28.00in x W 3.00in x H 3.00in
$49.99
Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.
$49.99
Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris.
Product Details:
- Durable rubber strip protects gear and crossbars from the wear-and-tear of loading
- 76" length can be easily trimmed to fit any bar width
- Compatible with Yakima HD Bar and JetStream Crossbars
- Set of two
Product Specs:
- Weight: 0.50 lbs
- Dimensions: L 76.00in x W 1.12in x H 0.33in
- Fully assembled
$54.99
Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars. PRODUCT DETAILS - Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts - Quick and easy installation - Includes slide in T-bolts and low-profile spacers - Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars TECHNICAL SPECS - Weight: 0.30 lbs - Dimensions: L 0.75in x W 0.75in x H 2.00in
$55.99
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up.
- Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four.
- Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only.
- Weight: 0.42 lbs
- Dimensions: L 1.75in x W 1.50in x H 1.00in
- No Assembly Required
$55.99
Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes
- Allows most RoundBar style mounts to attach in minutes
- Tool free installation
- Sold as a set of 4
- Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
$55.99
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers.
- Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four.
- Includes 4 RoundBar end caps
Product Specs:
- Weight: 0.42 lbs.
- Dimensions: L 2.00 in x W 2.00 in x H 1.00 in
- Limited Lifetime Warranty
Page 1 of 4
Next page