Filter By:
Fenders
$29.99
- Fork mounted mudguard, perfect for mountain bikes
- Mounts with a compression plug inside the steerer tube
- Blade width varies from 60 to 73mm (2.4'' to 2.9'')
$31.50
Following a design update, the HIGHTREK clip-on mudguard set impresses with its sporty look. It can be mounted to seat tube diameters of between 28 and 32mm. The well-thought-out universal fastener and clip enable the mudguard to be mounted and removed quickly without any tools.
$35.58
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
$35.00
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc.
- Fits a maximum tyre width up to 38mm.
- It is the ideal companion to our S-BLADE rear mudguard.
- Its smart, double hinged quick release fitting system also fits aero forks.
- Paintwork protection film for the frame is included.
$37.99
Stay clean and dry with SKS's Velo42 Urban fenders! The rear snap-on fender attaches to seat tubes between 25 and 35mm in diameter to give you full coverage from road spray. These fenders fit tires up to 32mm wide.
$40.00
Stay clean and dry with SKS's Velo 47 Trekking fenders! The universal mounting system attaches easily to most framers to give you full coverage from road spray. These fenders fit tires from 37 to 62mm wide.
$102.00
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support.
- Compatible only with disc brakes
- Includes hook-and-loop fasteners and tension rubber
- Weight: 580g
- Max. outer diameter: 35mm
- Wheel size: 27.5" (650B), 28"
- Tire width: 52mm
- Length, front fender: 680mm
- Length, rear fender: 870mm
$36.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$32.00
- 3-bolt mounts make for easy installation
- Designed to integrate seamlessly and look pro with RockShox branding
- Compatible with MY22 Pike and Lyrik models
$31.00
Don't let the weather get in the way of adventure. The RockShox branded ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties.
- 3-bolt mounts make for easy installation
- Designed to integrate seamlessly and look pro with RockShox branding
- Compatible with all ZEB models
$57.50
The FRX (Front Race) fender was designed with the help of World Cup and Enduro World Series riders wanting max mud and spray protection with zero faff.
Measuring 435mm in length the FRX provides awesome mud/spray stopping performance without breaking the bank.
- Fits all wheel sizes: 26", 27.5", 27.5+" and 29" wheels with tires up to 3 inches wide on a 'boost' fork
- Designed and made in the UK from 100% recycled black polypropylene
- Weight: 78g
$59.80
Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos.
To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times.
- Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination
- Designed and made in the UK from 100% recycled polypropylene
- Includes Helitape and nitrile O-rings
- Length: 490mm
- Width: 60mm
- Weight: 75g
$47.00
Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide.
The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier.
- Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination)
- Designed and made in the UK from 100% recycled polypropylene
- Includes Helitape and zip-ties
- Length: 560mm
- Width: 55mm
- Weight: 200g
$85.70
Building on the award-winning, tried and tested Rear Mudhugger design, the new MK2 fender has added 3 significant improvements:
1. Now attaches with reusable velcro straps to make fitting and removing a matter of seconds
2. Where the fender 'sits' on the seatstays we have incorporated rubber inserts which aid grip and improves damping
3. A new push fit BB extension piece, to protect the BB area from debris build up. This has been designed to be as thin as possible so that it can be easily trimmed to suit most bike rear triangle designs
The MEDIUM version is designed for bikes with a seatstay angle from 34 degrees down to 27 degrees. Can be fitted to 'most' bikes with disc brakes, even with external cables and hoses.
- 690mm long x 105mm wide
Comes supplied with:
- x2 helitape sheets
- x4 velcro straps
- x2 rubber damping strips
- x1 BB extension (230mm long x 80mm wide)
- Designed and made in the UK from recycled polypropylene
- 280g (w/o fittings)
$45.00
The new EVO fender was designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression.
The Shorty EVO Ziptie fender attaches directly to the fork with the supplied zip-ties. Compatible with most forks other than models with reverse arch.
- Total length: 390mm (Rr extension 255mm, Fr extension 105mm)
- More mud clearance
- No more crown fouling at full compression
- Designed and made in the UK from recycled PP
- Strong enough for DH racing at the highest level
- 100g
$59.99
- Made of resistant chromoplastic
- Stainless steel bracket and stays
- Pre-assembled for fast and easy installation
Page 1 of 1