Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Trailers/Strollers

$699.99
Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty
$349.99
For the couple that loves to bike together, there's the SideWinder. Featuring a swing-out arm allowing one person to load a tandem bike with ease. Fork-mount style that won't interfere with most hatchbacks. Fits Yakima round or square crossbars only. - Swing-out arm allows one person to easily load a bicycle built for two - Simple, tool-free installation - Won't interfere with most hatchbacks - Padded cradle and quick-release straps protect bottom-mounted cables - Fits Yakima round or square crossbars - SKS Locks sold separately - One tandem bicycle up to 50 lbs at min of 24" crossbar spread Product Specs: - Weight: 18.50 lbs. - Dimensions: L 56.00 in x W 8.00 in x H 12.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
$179.99
- Fits on most adult and children's bicycle (12'' to 20'') - Attaches onto child's bike in no time - The telescopic folding bar is discretely stored on one side of bike when not in use - Easy and pleasant to use, perfectly safe and very stable. - Costs less than a child's trailer - Carefully constructed, made from top-quality materials
$39.99 - $179.95
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
$115.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$54.99
- Axle Kit for Journey Trailer TX - Compatible with 12mm rear thru-axles under 180mm in length - Note: Choose the correct thread pitch, 1.0 / 1.5 / 1.75mm, to match your thru-axle
$49.99
The Trail-Gator Spare receiver Kit Headtube Attachment is a must-have if your Trail-Gator is going to be used on multiple children's (rear) bicycles. Makes swapping between bikes a snap. - Spare seatspost attachment (for the children's bike) for the Trail-Gator tow bar - Fits all Trail-Gator models including the 640020-640022-640023 - Allows the Trail-Gator to be attached to multiple juvenile bicycles quickly - Fits headtube up to 45mm (1.75")
$39.50
The adapter threads on to axles with an M12x1.25 thread. The Robert Axle Project Trailer Hitch Adapter for Rad Power Bikes and Mahle/EBIKEMOTION Equipped E-Bikes. Our hitch adapter for towing kid trailers and single-arm bike trailers is high quality and precisely machined. This includes all the two-wheeled child, pet and cargo trailers such as: Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Our hitch adapter is made of stainless steel and is incredibly durable. It’s built to handle towing a fully loaded bike trailer. It easily clears a variety of dropouts. It is easy to install. Simply replace the existing non-driveside nut with our adapter, and attach the hitch that came with your trailer. Our hitch adapter uses a 17 mm wrench to attach your hitch and precious cargo more securely than with other knurled adapters. When installing the hitch, the 17 mm wrench isolates and protects dropouts from marring and over-tightening.
$39.50
The adapter threads on to axles with a 3/8-26 thread. Common hubs with this axle are; Shimano Nexus, Shimano Alfine, Shimano Coasting. Robert Axle Project’s 3/8-26 adapter for Kid Trailers and Cargo Trailers is designed to allow attachment of any hitch-mounted trailer. These Hitch Adapters fit any trailer that has two wheels and a single point of attachment to the axle. Our hitch adapter is made of stainless steel and is incredibly durable. The Robert Axle Project Hitch Adapter helps trailer hitches fit more bikes. It easily clears hooded dropouts and other interfering dropouts. Simply replace the existing non-driveside nut with our adapter, and attach the hitch that came with your trailer. Our hitch adapter uses a 17 mm wrench to attach your hitch and precious cargo more securely than with other adapters. When installing the hitch, the 17 mm wrench isolates and protects dropouts from marring and over-tightening that could ruin your bike’s frame.
$39.50
The adapter threads on to axles with an M10x1.0 thread. Common hubs with this axle are; Rohloff, Enviolo, Shimano Nexave, SRAM I-Motion, and SRAM Torpedo. Our hitch adapter for towing kid trailers and single-arm bike trailers is high quality and precisely machined. This includes all the two-wheeled child, pet and cargo trailers such as: Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Our hitch adapter is made of stainless steel and is incredibly durable. The Robert Axle Project Hitch Adapter helps trailer hitches fit more bikes. It easily clears hooded dropouts and other interfering dropouts. Simply replace the existing non-driveside nut with our adapter, and attach the hitch that came with your trailer. Our hitch adapter uses a 17 mm wrench to attach your hitch and precious cargo more securely than with other adapters. When installing the hitch, the 17 mm wrench isolates and protects dropouts from marring and over-tightening that could ruin your bike’s frame.
Page 1 of 1