Other

The ultimate in cockpit data integration. Personalize your ride and your data with RED AXS controls and the Hammerhead Karoo. Use Bonus Buttons to scroll your head unit or shift your derailleur from our most comfortable controls. FEATURES: - Aftermarket kit includes: Hammerhead Karoo, left and right Shift-Brake System controls, and flat mount calipers - Compatible with all generations of AXS derailleurs

Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper

Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Built with input from the world’s best riders, Charger 3.1 RC2 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. FEATURES - Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day - Includes full right-side internals including controls - Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) - High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments - Includes vibration-fighting ButterCups to block 20% of trail chatter

Built with input from the world’s best riders, Charger 3.1 RC2 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. FEATURES - Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day - Includes full right-side internals including controls - Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) - High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments - Includes vibration-fighting ButterCups to block 20% of trail chatter

The Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control. - Includes complete right side internals

Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper

Designed for BSA 68/73mm bottom bracket shells when using a SRAM DUB Crankset. - Grade 3 Ceramic balls (Si3N4), with ABEC 5 precision - CN Bearing Clearance - Races are ultra-durable for longer life! Nitrogen infused steel, heat treated and cryogenically frozen - These bearings are 3.5 times more corrosion resistant than stainless steel - Will not rust; little servicing required - Silicone seals. These are the lowest friction bearings available; period! Vendor Part # BKC-0815

Vendor Part # BKCJ-0500

- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs

- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings

The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. - Every detail machined and optimized to save on weight and maximize your performance - Factory tuned compression (in open position) provides the highest level of XC performance, precision and control - Maximum efficiency with a rock-solid lockout

The Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control. - Includes complete right side internals

RockShox 35mm Crown/Steerer/Uppertube Assemblies

Cane Creek's 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.

- Fastener kit with an assortment of nuts, bots and washers. - 475 Pieces, 18 Different Parts, Three Bolt Styles in Lengths 8 to 30mm - Assortment of commonly used bicycle fasteners

REAR DERAILLEUR CAGE ASSEMBLY KIT RED XPLR AXS (FULL REPLACEMENT CAGE ASSEMBLY INCLUDING OUTER AND INNER CAGES, DAMPER AND PULLEYS) Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.

RockShox Motion Control DNA Compression Dampers

Replacement CSU Components for RockShox

Replacement CSU Components for RockShox

Cassette spacers, bottom bracket spacers and hardware for HollowtechII, GXP, BB30/PF30. - Comprehensive shop kit for bottom bracket and cassette/freewheel spacing needs - 120 pc. kit in durable plastic storage box

MaxHit is Enduro's latest patent-pending innovation; where the bearing is actually the component. MaxHit bottom bracket bearings are designed to thread directly into your bicycles bottom bracket shell, eliminating the need for the aluminum cups that are traditionally used to carry the bearings. This unique design frees-up space for much larger balls that more than double the load capacity compared to standard BB bearings. The kit includes a full selection seals and spacers to ensure proper installation in any BSA threaded bike. Machined entirely from 440C stainless steel and guaranteed for life, MaxHit BB bearings include proprietary double-lip labyrinth seals and Enduros extra high pressure grease to ensure a lifetime of trouble-free, heavy duty performance. Made in the USA Vendor Part # BKSM-8112 This BB requires a Shimano XT BB tool for install and removal (ex. Abbey BB SCT, Park LRT-4)

Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with Sram DUB crankset spindles - Flanged, double-row bearings with anti-corrosion Black Oxide/Magnetite treated, 52100 High-Carbon Chromium alloy races paired with grade 10 balls. Vendor Part # BK-7019

Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with SRAM DUB cranksets (28.99mm spindle) - XD-15 Ceramic-Hybrid cartridge bearings pressed directly into the BB shell, that feature - Deep-groove raceways allowing for maximum sized Grade 3 Silicon Nitride ceramic balls, increased contact area and improved performance and longevity. Vendor Part # BKC-7022

Designed for frames with threaded BSA 73mm BB shell - Compatible with cranksets with a 30mm spindle greater than 104mm in length - Stainless steel angular contact bearings: 440C Stainless steel balls and races - Machined aluminum cups, Black ano Vendor Part # BKS-6053

RockShox XLoc Parts

The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is constructed using carbon fiber, allowing for even more complex shaping and lighter weight. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm

The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. Vuka Race Carbon Extensions were designed using data compiled from thousands of fit sessions with recreational and professional cyclists and triathletes by the world’s best fitters. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm