Filter By:
Riser
$149.99
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
$214.99
- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill)
- Patented oval bar shape provides increased vertical compliance
- Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips
- Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response
- Third party online sales are strictly prohibited by manufacturer
$124.99
DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars.
- Intended use: Enduro and DH
$124.99
Oversized 35mm Bore Aluminum Handlebar
Designed for Downhill / Enduro / All Mountain
Incredibly detailed two tone bead blast and polish ano finish
Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
810mm wide
38mm Rise (also available in a 25mm rise)
9 degree bend x 5 degree upsweep
Flex and deflection characteristics designed to match the Blacklabel handlebar
Features measured cut marks and center alignment detail
Black ano finish with Stealth, White, Red, Purple, Green, Blue, Orange, Turquoise and Bronze Graphics
Backed by a Lifetime Crash Replacement Plan
Weight: 330 grams
$109.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width.
- 760mm wide
- Wide to start and trimmable by 30mm each side
- Made from tough 7050 lightweight aluminum
SPECIFICATIONS
- Type: Riser
- Application: XC
- Clamp Diameter: 31.8mm
- Width: 760mm
- Backsweep (degrees): 9
$283.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day.
- Available in 760mm carbon with 20mm rise
- 35mm clamp
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
SPECIFICATIONS
- Type: Riser
- Clamp Diameter: 35.0mm
- Width: 760mm
- Rise: 20mm
- Backsweep (degrees): 7
$283.00
RIP, NO RATTLE.
Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 35.0mm
- Width: 800mm
- Material (HB): Carbon
- Rise (HB): 25mm
- Type (bar): Riser
- Backsweep (degrees): 9
- Upsweep (degree): 5
$109.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control.
- Stiff, precise, and super-wide
- Made with tough 7050 alloy
- Descendant geometry from TruVativ's best enduro rider’s input
- Backsweep: 7°
- Upsweep: 5°
$109.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control.
- Material: Al-7050
- Width: 800mm
- Backsweep: 9-degrees
- Rise: 25mm
- Upsweep: 5-degrees
- Colors: Black
$283.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm
- Material (HB): Carbon
- Rise (HB): 20mm
- Type (bar): Riser
- Upsweep (degree): 5
$283.00
It's Stiff, Not A Stiff.
It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter.
Features:
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
Specifications:
- Clamp Diameter: 31.8mm
- Width: 760mm, 800mm
- Material (HB): Carbon
- Rise (HB: 25mm
- Type (bar): Riser
- Upsweep (degree): 5
$149.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider.
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR
- Material: Zirconium Doped 7-Series Alloy
- Weight (g): ±270g (15) / ±275g (25)
- Diameter (mm): 31,8
- Rise (mm): 15 / 25
- Length (mm): 780
- Geometry (deg°): 5° up x 7° back
- Finish: Shot peen anodized, decal logos
$164.99
- DH and Freeride, ultra-wide, 820mm wide handlebar
- Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Shot-peening and anodizing enhances fatigue life even further
- Weight optimized and adjustable to 760mm
Features:
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design
- Material: Zirconium Doped 7-Series Alloy
- Weight: ±300g
- Diameter: 35mm
- Rise: 25mm
- Length: 820mm
- Geometry: 5° up x 8° back
- Finish: Shot peen anodized, decal logos
$124.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more.
- Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy
- Material: MGR Super Six Alloy
- Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm)
- Diameter: 31.8mm
- Rise: 5mm / 15mm / 30mm / 50mm
- Length: 800mm (Adjustable to 740mm)
- Geometry: 4° up x 8° back
- Finish: Shotpeen anodized, decal logos
$149.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
Features
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy
- Material: MGR Super 6 Alloy
- Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm)
- Sweep: 4° up x 8° back
- Finish: Shot peen anodized, decal logos
$104.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm.
- Cost-effective upgrade to your cockpit without sacrificing quality
- Shot-peening and anodizing enhances fatigue life
- Length: 800mm
- Dial your fit—adjustable to 740mm
- Choose 25/40
- 35mm clamp diameter
- 5° up x 8° backsweep
- Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
$89.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses.
Spank Spoon: the best-priced handlebar on the market without compromise!
- Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality
- Freeride inspired all-mountain geometry makes the bar extremely versatile
- Shot-peening and anodizing enhances fatigue life
- Dial your fit—adjustable to 740mm
- Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$169.99
- High strength 7 series Aluminium Alloy
- Shot peened for increased fatigue life
- Corrosion and abrasion resistant hard anodized finish
- Laser etched positioning grid for easy set up
- Width marks allow personalized fit adjustment
- Permanent Graphics
$329.99
- The FatBar Carbon is the ultimate DH race handlebar.
- This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
$329.99
- The FatBar Carbon is the ultimate DH race handlebar.
- This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
$329.99
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings.
- Uni-Directional carbon construction
- Ride-tuned to provide an ideal combination of stiffness and shock absorption
- Increased center section width for fine-tuned flex characteristics
- Downhill and twin crown fork compatible
- Permanent graphics, set-up grid and cut marks
$169.99
The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability.
- The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing
- Exclusive Series 7 aluminum is heat treated to provide strength and durability
- Shot peened to increase fatigue life and durability
- Hard anodized to keep your handlebar looking new
$329.99
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar.
- Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
$169.99
- The second version of the Fatbar has undergone a full structural re-design.
- In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm.
- Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
$124.99
Brendan Fairclough's signature handlebar is an homage to the effortless style, grace, and speed exemplified by Brendan's every move. The BF800 Brendog signature handlebar, which has been developed and tested on the World Cup DH circuit for almost three years to perfect the feel he demands for World Cup-caliber speed.
Creating the perfect combination of rise, width, bends, sweep, flex, and responsive damping is not an easy task, but DEITY has perfected the ability to deliver the best-feeling handlebars with unparalleled strength time-and-time again.
Utilizing Brendan's preferred 8-degree backsweep with our favorite 5-degree upsweep gives this bar a more aggressive positioning to attack the gnarliest DH trails in the world. At an 800mm width and featuring a 30mm rise, our proprietary Gradient Butting Technology coupled with our Mono Heat Treatment Procedure delivers a handlebar that is more than 20% stronger than any other handlebar from our competition at this weight category.
We guarantee you will look as good as Brendan riding his signature BF800 Brendog Handlebar while you're pushing your limits to match his speed and style! So get your hands on DEITY's latest and greatest rider collaboration, designed to elevate your ride to podium status!
- The Brendan Fairclough Signature Handlebar
- Designed for DH / Enduro / All MTN applications
- Developed and tested rigorously for nearly 3 years on the World Cup DH circuit
- Incredibly detailed two-tone bead blast and polished ano finish
- Brendog signature 8-degree bend / backsweep by 5-degree upsweep
- 800mm width
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Mono Heat Treatment Procedure for increased strength
- Stiffness for tracking yet compliant for endless chatter and big hits
- Wider center bore spacing for unrivaled stability
- Designed for maximum ride quality with a 31.8mm bore
- Alignment control markers for perfect set up and spacing of your levers
- Features measured cut marks and center alignment detail
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 30mm rise (343 grams)
$124.99
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships!
- 800mm width
- Designed for DH / Enduro / All MTN applications
- Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018
- Incredibly detailed two-tone bead blast and polished ano finish
- 9-degree bend / backsweep by 5-degree upsweep
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Designed for maximum ride quality with a 31.8mm bore
- World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven
- The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams
- Features measured cut marks and center alignment detail
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 15mm rise: 333g
- 25mm rise: 342g
- 38mm rise: 343g
$124.99
- Cam Zink designed bars with unique upsweep and backsweep
- 9.5 deg bend x 4.5 deg upsweep
- Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail
- Made from custom gradient butted 7075 T6 aluminum
- 800mm wide, 31.8mm clamp
- Third party online sales strictly prohibited by manufacturer
$124.99
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain!
Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat!
- The DEITY All MTN / Enduro / Trail handlebar
- 787mm wide
- The SKYLINE handlebar is our lightest aluminum bar
- Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability
- Custom Gradient Butted 7075 T73 aluminum
- Featuring a 31.8mm bore for lightweight performance and strength
- Features measured cut marks and center alignment detail
- 9 degree bend / backsweep by 5 degree upsweep
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
Sizes:
- 15mm (290gm)
- 25mm (296gm)
$244.99
After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar.
Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides.
- Oversized 35mm Bore Carbon Handlebar
- Designed for Enduro / All Mountain / Trail
- Developed and designed exclusively with our own in house DEITY molds
- Unidirectional Carbon Construction
- Damping properties reduce hand fatigue
- 800mm Width
- 9 degree bend x 5 degree upsweep
- The ultimate combination of strength, weight, and ride quality
- Textured non slip stem clamping surface
- Textured grip ends for added bite
- Covered by our Lifetime Crash Replacement Policy to the original owner
- Recommended MAX Torque Spec range (4 - 4.5 Nm)
- 15mm rise: 222 grams
- 25mm rise: 226 grams
$244.99
Deity Speedway Handlebars: at 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. Designed for the sweet spot that absorbs maximum vibration, chatter and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed.
Page 1 of 2
Next page